Page 5 of 18

Re: I want someone to remake Yuri XIII compatible with Minotaur 1.1

Posted: Mon Nov 13, 2023 7:24 pm
by Tetchi
Zeb2345 wrote: Mon Nov 13, 2023 4:46 pm does this one work?
https://mugenarchive.com/forums/downloa ... fervicante
As far as I know the sounds were "remastered" but nothing out of the extraordinary, a matter of taste, in my case I prefer the classic, but as they say: "To taste the colors."

At night I will have the chance to get involved and share the sound and this guy can check it out, if he is the one who wants.

Re: I want someone to remake Yuri XIII compatible with Minotaur 1.1

Posted: Mon Nov 13, 2023 8:44 pm
by Phucan
it's ok, right?

Re: I want someone to remake Yuri XIII compatible with Minotaur 1.1

Posted: Tue Nov 14, 2023 12:44 am
by Tetchi
Phucan wrote: Mon Nov 13, 2023 8:44 pmit's ok, right?
Everything is fine, calm and patience.

It is 6:43 p.m. in this part of the world, I think that after 11:00 p.m. I will be using the PC and will be able to place the sound so that you can hear it, the rest will take a little time, not much.

Re: I want someone to remake Yuri XIII compatible with Minotaur 1.1

Posted: Tue Nov 14, 2023 12:49 am
by Tetchi
@ Zeb2345
@ ddlnll

You will know these data, to advance faster.

1. Group and number in the SFF (of the victim) for the sprites of the animation that is being requested.

2. What animation number is in the AIR (obvious) and if it has any time restrictions, for example the first element is so long and then the loop begins or one animation is the initial position and another animation is the fornication and another when they finish fucking her.

Re: I want someone to remake Yuri XIII compatible with Minotaur 1.1

Posted: Tue Nov 14, 2023 1:44 am
by Zeb2345
Tetchi wrote: Tue Nov 14, 2023 12:49 am @ Zeb2345
@ ddlnll

You will know these data, to advance faster.

1. Group and number in the SFF (of the victim) for the sprites of the animation that is being requested.

2. What animation number is in the AIR (obvious) and if it has any time restrictions, for example the first element is so long and then the loop begins or one animation is the initial position and another animation is the fornication and another when they finish fucking her.
Well he didn't specify which pose he needed but in the video I showed it was seen that kula was in the pose 12250
with which it would be:
12250 and 6 index
12250-0
12250-1
12250-2
12250-3
12250-4
12250-5

and the perfect .air for minotaur would be this:

[Begin Action 1180212]
12250,0, 0,-30, 6, H
12250,1, 0,-30, 3, H
12250,1, 0,-30, 3, H

12250,2, 0,-28, 6, H
loopstart
12250,2, 0,-30, 3, H
12250,1, 0,-30, 3, H
12250,2, 0,-28, 3, H

[Begin Action 1180213]
12250,2, -0,-30, 3, H
12250,2, -0,-28, 3, H
12250,2, -0,-30, 3, H
12250,1, -0,-30, 3, H
12250,0, -0,-30, 3, H

loopstart
12250,0, -0,-30, 14, H
12250,0, -0,-29, 2, H
12250,0, -0,-30, 2, H
12250,0, -0,-29, 2, H
12250,0, -0,-30, 20, H

;•‚Ü‚ñ‚®‚è•Ô‚µ ‘Ò‹@
[Begin Action 180110]
12250, 0, 0,-11,300,H

; ƒsƒXƒgƒ“ ‘¬“x1
[Begin Action 180111]
12250, 0, 0,-11, 4,H
12250, 1, 0,-11, 4,H
12250, 2, 0,-11, 4,H
12250, 2, 0,-11, 10,H
12250, 1, 0,-11, 2,H

; ƒsƒXƒgƒ“ ‘¬“x2
[Begin Action 180112]
12250, 0, 0,-11, 2,H
12250, 1, 0,-11, 2,H
12250, 2, 0,-11, 2,H
12250, 2, 0,-11, 5,H
12250, 0, 0,-11, 2,H

; ƒsƒXƒgƒ“ ‘¬“x3
[Begin Action 180113]
12250, 0, 0,-11, 1,H
12250, 1, 0,-11, 1,H
12250, 2, 0,-11, 1,H
12250, 2, 0,-11, 3,H
12250, 0, 0,-11, 1,H

; •ï‚Ü‚ñ‚®‚èŽË¸
[Begin Action 180114]
12250, 0, 0,-11, 4,H
12250, 1, 0,-11, 4,H
12250, 2, 0,-11, 4,H
12250, 1, 0,-11, 30,H
12250, 2, 0,-11, 2,H
12250, 1, 0,-11, 2,H
12250, 2, 0,-11, 2,H
12250, 2, 1,-11, 2,H
12250, 2, 0,-11, 2,H
12250, 2, 1,-11, 2,H
12250, 2, 0,-11, 3,H
12250, 1, 0,-11, 35,H
12250, 2, 0,-11, 2,H
12250, 1, 0,-11, 2,H
12250, 2, 0,-11, 2,H
12250, 2, 1,-11, 2,H
12250, 2, 0,-11, 2,H
12250, 2, 1,-11, 2,H
12250, 2, 0,-11, 3,H
12250, 1, 0,-11, 40,H
12250, 2, 0,-11, 2,H
12250, 1, 0,-11, 2,H
12250, 2, 0,-11, 2,H
12250, 2, 1,-11, 2,H
12250, 2, 0,-11, 2,H
12250, 2, 1,-11, 2,H
12250, 2, 0,-11, 3,H
12250, 1, 0,-11, 45,H
12250, 2, 0,-11, 2,H
12250, 1, 0,-11, 2,H
12250, 2, 0,-11, 2,H
12250, 2, 1,-11, 2,H
12250, 2, 0,-11, 2,H
12250, 2, 1,-11, 2,H
12250, 2, 0,-11, 2,H
12250, 2, 1,-11, 2,H
12250, 2, 0,-11, 2,H
12250, 2, 1,-11, 3,H
12250, 2, 0,-11, 14,H
12250, 2, 0,-11, 5,H
12250, 1, 0,-11, 5,H
12250, 2, 0,-11, 5,H
12250, 1, 0,-11, 5,H
12250, 2, 0,-11, 20,H
12250, 1, 0,-11, 20,H
12250, 0, 0,-11, 20,H
12250, 0, 0,-11, 50,H

;------------------------------------------

[Begin Action 180115]
12250,0, 0,-11, 6, H
12250,1, 0,-11, 3, H
12250,1, 0,-11, 3, H

12250,2, 0,-20, 6, H
loopstart
12250,2, 0,-21, 3, H
12250,1, 0,-21, 3, H
12250,2, 0,-20, 3, H

[Begin Action 180116]
12250,2, 0,-21, 3, H
12250,2, 0,-20, 3, H
12250,2, 0,-21, 3, H
12250,1, 0,-21, 3, H
12250,0, 0,-21, 3, H

loopstart
12250,0, 0,-21, 14, H
12250,0, 0,-20, 2, H
12250,0, 0,-21, 2, H
12250,0, 0,-20, 2, H
12250,0, 0,-21, 20, H

that would be enough for the missionary to work with the minotaur.

Re: I want someone to remake Yuri XIII compatible with Minotaur 1.1

Posted: Tue Nov 14, 2023 2:15 am
by Tetchi
@ Zeb2345

Thanks for the information, this speeds up the work.

From what I see, it only takes up 2 sprites at least for that sequence to work.

Thanks again for the support, I will be using the Minotaoru that was posted in this message thread.

Even so, it doesn't mean that I will finish it today but I will advance faster knowing this when I get my hands on it.

Re: I want someone to remake Yuri XIII compatible with Minotaur 1.1

Posted: Tue Nov 14, 2023 2:34 am
by Zeb2345
Tetchi wrote: Tue Nov 14, 2023 2:15 am @ Zeb2345

Thanks for the information, this speeds up the work.

From what I see, it only takes up 2 sprites at least for that sequence to work.

Thanks again for the support, I will be using the Minotaoru that was posted in this message thread.

Even so, it doesn't mean that I will finish it today but I will advance faster knowing this when I get my hands on it.
You're welcome tetchi I'm here to help.
It will also be interesting to see the final result.
I look forward to seeing the final result because the truth is that this very peculiar request caught my attention. :!:

Re: I want someone to remake Yuri XIII compatible with Minotaur 1.1

Posted: Tue Nov 14, 2023 2:36 am
by Phucan
Yuri XIII remake is really worth looking forward to

Re: I want someone to remake Yuri XIII compatible with Minotaur 1.1

Posted: Tue Nov 14, 2023 4:34 am
by ddlnll
Tetchi wrote: Tue Nov 14, 2023 12:49 am @ Zeb2345
@ ddlnll

You will know these data, to advance faster.

1. Group and number in the SFF (of the victim) for the sprites of the animation that is being requested.

2. What animation number is in the AIR (obvious) and if it has any time restrictions, for example the first element is so long and then the loop begins or one animation is the initial position and another animation is the fornication and another when they finish fucking her.
Hmm...I don't know which pose you are talking about. According to Zeb's explanation, mating press?
I hope he has explained everything.

Re: I want someone to remake Yuri XIII compatible with Minotaur 1.1

Posted: Tue Nov 14, 2023 10:55 am
by Tetchi
Ready, I have the edition, I am adding the sound, but I am honest, the use of minotaur is chaos to test it, I am going to simplify the code of the attack that interests us in this work, but I will do it tomorrow, because it will take time , I respect the work done but the AI interferes and does not allow it to be used and also when you grab it it gives a directional arrow which at least if I only play, nothing happens, it stays in a spasm.

If someone wants to speed up this process, indicate what the state is in the cmd of that attack and I will simplify the attack without much hassle, directly to a button to test it.

Edit.

Note, the version that is placed in this minotaur theme does not have the sequence that is required, as far as I have verified, I continue to verify, I may have been wrong.

Tell me where to download that version that has that movement.